Drivers Automationdirect Port Devices



  1. Drivers Automationdirect Port Devices Charlotte
  2. Drivers Automation Direct Port Devices Gigabit
  3. Drivers Automationdirect Port Devices Lucie
AutomationDirect | Direct Sales in US and Canada | 1-800-633-0405
Drivers automationdirect port devices lucieLucie

Software Downloads

Devices

USB to RS-232C serial adapter cable transparently connects serial devices to PC applications via a USB port. USB-A male connector to 9-pin D-shell male connector. If needed, drivers. 1) A USB-to-serial adapter generally requires a driver to be installed, either available from disk or download. Once that is done, the adapter should be seen with an assigned COM port in Windows Device Manager.

Drivers Automationdirect Port Devices Charlotte


Download Options:

  • Restricted Software Downloads (Password Required)

Free Software, Upgrades, and Maintenance Releases:

SOFTWARE UPDATE NOTIFICATION: No more hunting for software updates! Sign up for our software update e-mail notification service to find out when updates to our most popular software packages are available.

  • DirectSoft
    Visit Host Engineering's website for new product information and software development kits.
  • Dymo Labelers
    Visit the Dymo support website for the most current firmware, software, and drivers
  • Ethernet SDK
    Visit Host Engineering's website for new product information and software development kits.
  • SureServo
  • SureStep
  • Think & Do
    Visit the Phoenix Contact website for a complete list of Think & Do application notes and product information.
  • WEG AC Drives and Soft Starters: Programming software and documentation for WEG CFW100, CFW300 and SSW07 products

Drivers Automation Direct Port Devices Gigabit

Drivers Automationdirect Port Devices

Drivers:

Drivers automationdirect port devices terminal
  • EA-MG-PGM-CBL drivers
    Drivers for the EA-MG-PGM-CBL USB-to-serial cable (Windows 2000 SP4, Windows XP SP2, and Windows Vista(32/64 bit), Windows 7 (32/64 bit), Windows 8 and 8.1 (32/64 bit), Windows 10)
  • Industrial Monitors
  • USB-485M serial converter drivers
    Drivers for serial converter USB-485M for Windows XP/7/8/8.1/10 (32 bit and 64 bit)

Tools and Utilities:

  • CTRIO Workbench Tool
    The CTRIO Workbench Tool allows you to configure our CTRIO (High Speed Counter I/O) modules. CTRIO Workbench has utilities to configure the CTRIO modules, verify module I/O mapping and upgrade the CTRIO OS image.

  • DNLoader
    DNLoader is a free utility that allows you to upload and download PLC programs without the use of DirectSOFT. Available from the Host Engineering web site.

  • ERM Workbench Tool
    The ERM Workbench Tool allows you to configure our ERM (Ethernet Remote I/O)modules. ERM Workbench has utilities to configure the ERM modules, verify module I/O mapping and upgrade the ERM OS image.

  • MDM-TEL Configuration Wizard
    Version 2.08
    View End User License Agreement

  • Modbus TCP master program
    For use in troubleshooting Modbus TCP connections to Modbus TCP slave devices.

  • NetEdit Tool
    The NetEdit Tool allows you to configure our ethernet modules.

  • NITRA Pneumatics Support Resources
    NITRA Pneumatics configuration software and help files

  • Radio Modem Utilities
    These utilities are included on the CD that is received in the package with the Cirronet Products. For help in using these products, please go to the documentation section of our web site and download the user manuals.

    • CR-HN04/50x Serial Radio modems tools
      • HNWIZARD: This Configuration Wizard is located on the CR-HN04/50x software and documentation CD included in the CR-HN package
    • CR-SEAP-x Spread Spectrum Ethernet Access Point tools
      • IPHUNTER: The CR-SEAP CD has device detection and IP setting utility named IP Hunter. This utility will detect all Cirronet Ethernet devices on the local network, even those with no IP address.
      • SNAPCom:SNAPCom is a simple TCP/UDP utility program to help familiarize the user with the CR-SEAP and its operation. SNAPCom can be executed off the CD or copied onto a PC. There is no need to install the program. SNAPCom is not a configuration utility and assumes the CR-SEAP has previously been configured using IP Hunter, WinSNAP and/or a telnet session.
      • Winsnap: WinSNAP will automatically find the appropriate serial port and configure the serial port settings for you. The software will inform you of its progress and any problems that arise.
      • WinSEM: The WinSEM program can be used to set up the CR-SEB through the Console port.
    • CR-SEBx and CR-SEH Ethernet Radio Modems tools
      • IPHUNTER: The CR-SEAP CD has device detection and IP setting utility named IP Hunter. This utility will detect all Cirronet Ethernet devices on the local network, even those with no IP address.
      • WinSEM: The WinSEM program can be used to set up the CR-SEB through the Console port.

  • Socomec Easy Config Utility for Diris meters
    This Configurator utility enables quick and easy remote device configuration for DIRIS A10 and A20 multifunction meters. Minimum requirements:

    • Windows XP Service pack 3, VISTA or Windows 7 / 8 / 10
    • 1.0 GHz, 512 MB
    • 500 MB on hard disk
    • Resolution screen: 1024x768
    • Framework .net version 3.5 SP1 or higher: Free download of the Microsoft site under www.microsoft.com/net

  • SR55 IPConfig Tool
    The IPConfig Tool allows you to configure the IP addresses on SR55-CM-MODTCP and SR55-CM-ENETIP soft starter communication modules.

  • Stratus A/C BTU/H Calculator
    A free utility to calculate required BTU/H for Stratus Enclosure Air Conditioners.

  • T1K-MODBUS Setup Tool
    The T1K-MODBUS Setup Tool allows user configuration of extended timing parameters including Stop Bit(s), Parity, On Delay Time, Off Delay Time, and Communication Time-out that cannot be altered from the hardware dip switches. This software is Windows 95/98/NT/2K compatible and requires an RS-232 serial cable (our p/n D2-DSCBL is compatible) to be connected from a PC to the T1K-MODBUS auxiliary RJ11 serial port.

  • Trumeter ADM Graphic Panel Meter Configurator Utility
    Configurator utility allows you to program custom configurations onto your ADM. Minimum requirements: A PC or laptop running Windows XP, Vista, 7, 8, or 10 operating system, 32- or 64-bit, Microsoft .NET Framework. (If you don’t have this, you can download it from www.microsoft.com/net).

  • Ultrasonic Level Sensor WEBCAL software
    WEBCAL software is used for configuration and firmware updates of ultrasonic level sensors.

Configuration Files:

  • D0-DEVNETS EDS File
    DeviceNet Electronic Data Sheet (EDS) for D0-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

  • F2-DEVNETS-1 EDS and Icon File
    DeviceNet Electronic Data Sheet (EDS) for F2-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file. An icon (.ico) file is also included for your convenience.

  • GS4-CM-ENETIP EDS File
    Ethernet/IP Electronic Data Sheet (EDS) for GS4-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

  • GS20A-CM-ENETIP EDS File
    Ethernet/IP Electronic Data Sheet (EDS) for GS20A-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

  • GS20(X) PID Configuration Tool
    A visualization and cross reference of the PID control parameters for GS20(X) drives.

  • H0-PSCM GSD File
    Profibus GSD file for H0-PSCM is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

  • H2-PBC GSD File
    Profibus GSD file for H2-PBC is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

  • L5KPreDefine_Template
    L5KPreDefine_Template.txt is a template file that contains all of the predefined data types in RSLogix5000. This file is used in conjunction with the C-more Programming Software to import Allen Bradley RSLogix5000 predefined data types into the C-more Tag Name Database. Refer to Application Note 'C-more Importing AB Logix PreDefined Data Types' for instructions on using this file with the C-more Programming Software.

  • Nitra Pneumatics EDS files
    Ethernet/IP and CMV Electronic Data Sheet (EDS) files are available. These files are provided in 'zip' format. Save to your computer and use the unzip utility of your choice to extract the EDS file.

  • SR55-CM-ENETIP EDS File
    Ethernet/IP Electronic Data Sheet (EDS) for SR55-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

  • T1H-PBC GSD File
    Profibus GSD file for T1H-PBC is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

  • T1K-DEVNETS EDS File
    DeviceNet Electronic Data Sheet (EDS) for T1K-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

Drivers Automationdirect Port Devices Lucie